For the performance
Our laboratory performs comprehensive lifespan and photometric testing to validate product longevity and optical performance.
Lighting products are tested under controlled laboratory conditions at nominal voltage and ambient temperature to monitor their lifespan.
Static Positioning Test
Precisely locates the light intensity center of the luminaire using laser alignment in a darkroom.
Dynamic Rotation Test
Rotates the luminaire 360 degrees while collecting real-time intensity data to generate distribution curves.
LED luminaires are powered and tested in the center of an integrating sphere, with key photometric, colorimetric, and electrical parameters measured after stabilization.
Comprehensive Testing for Uncompromising Quality
Defining safety and reliability through data-driven validation.
For Reliability
-
![]()
Dust Resistance
Evaluates sealing performance using controlled dust concentrations (2–20 kg/m³) and airflow (1–10 m/s). Complies with IP5X (limited dust ingress) and IP6X (total dustproof) standards.
-
![]()
Package Drop Test
Simulates transportation hazards. Filled product boxes are dropped from heights (0.5m–1.5m) onto edges, corners, and surfaces. Post-test inspections check for structural damage and functional integrity.
-
![]()
Rollover Test
Products placed on concrete are run over by a standard tire (P225/75R15) at 5000N ± 250N pressure and 8 km/h ± 2 km/h speed. Products must remain safe and functional.
-
![]()
Rain Test
Spray and immersion tests per GB/T 4208, validating water resistance levels such as IPX3 (spray at 60°), IPX4 (splash-proof), and IPX5/6 (water jet).
-
![]()
Connector Durability
Charging ports subjected to water immersion, gun heads run over by vehicle wheels, and individual plug drop tests from about 3m height.
-
![]()
Climatic Testing
Covers temperature extremes (-40°C to 200°C), damp heat (e.g., 85°C/85% RH), and salt spray corrosion (5% NaCl solution).
Needle Flame Test for Flame-Retardant Components
A standardized needle flame generator (0.5 mm nozzle, ≥35 mm length) fueled by high-purity butane (≥95%) is applied to the sample for a specified duration. During and after ignition, observers record ignition behavior, flame spread, dripping, and whether droplets ignite the underlying tissue. The test evaluates fire resistance under fault conditions.
Charging Pile Safety Compliance Test
The three-in-one test system integrates an oscilloscope to capture waveforms in real time, enabling precise analysis of charging pile safety compliance and ensuring electrical safety and protocol conformity.
Performance Test
Dual-gun charging, control guidance, over/under-voltage, residual current, and voltage surge tests.
Aging Test
Performs full-power load testing (e.g., 7KW charger at 220V AC/32A) to evaluate stability under prolonged maximum load conditions.
Endurance Test
Simulates repeated plugging/unplugging cycles via automated aging programs controlled through computer software.
Wire Flex Test
The flexing test is a method to evaluate the fatigue resistance of materials or components under repeated dynamic loads such as bending and stretching. It is widely applied in fields like wires and cables, rubber products, coated fabrics, and more.
For Compliance
Global certification for all GONEO products
